Orajet 3164 Gloss White 1mx1370mm
R63.25 Incl.
Description
Soft PVC film available in transparent and white, with a glossy or matt surface.
Release Paper
Silicone coated paper on one side, 135 g/m²
Adhesive
Polyacrylate, permanent, transparent
Area of use
For brilliant and colourful advertising for short- and medium-term outdoor use
Printing Method
Inkjet printing with solvent based inks, UV- or latex inks
Technical Data
Thickness* (without paper and adhesive) 100 micron
Description
Description
Soft PVC film available in transparent and white, with a glossy or matt surface.
Release Paper
Silicone coated paper on one side, 135 g/m²
Adhesive
Polyacrylate, permanent, transparent
Area of use
For brilliant and colourful advertising for short- and medium-term outdoor use
Printing Method
Inkjet printing with solvent based inks, UV- or latex inks
Technical Data
Thickness* (without paper and adhesive) 100 micron
Dimensional stability (FINAT TM 14) Adhered to steel, no shrinkage in cross direction, in length
0,4 mm max.
Temperature resistance*** Adhered to aluminium, -40° C to +80° C, no variation
Water resistance Adhered to aluminium, after 48h/23° C no variation
Adhesive power* (FINAT TM 1, after 24h,
stainless steel)
16 N/25 mm
Tensile strength (DIN EN ISO 527) Along: min. 19 MPa
Across: min. 19 MPa
Elongation at break (DIN EN ISO 527) Along: min. 130%
Across: min. 150%
Shelf life** 2 years
Minimum application temperature >+10° C
Service life by specialist application
Under vertical outdoor exposure***
4 years (not printed)
* average ** in original packaging, at 20° C and 50% relative humidity *** normal climate of Central Europe
Note
After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate.
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination
which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least
three weeks and to completely cure. The compatibility of the selected lacquers and paints should be tested by the user, prior
to the application of the material. Furthermore the application information published by ORAFOL must be considered.
IMPORTANT NOTICE
All ORAJET® products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORAJET® products is based
upon research which the Company believes to be reliable although such information does not constitute a warranty. Because
of the variety of uses of ORAJET® products and the continuing development of new applications, the purchaser should
carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all
risks regarding such use. All specifications are subject to change without prior notice.